A toilet water supply line leak is one of the many ways a loo can run amok. The line runs from just under the tank near the base of the toilet and attaches to the water line on the wall or floor. Water leaking from the toilet supply line can be a simple fix and requires only basic tools. Remove all the necessary bolts, washers and nuts from both the inside of the tank and below the bowl. Replace any faulty spacers, bolts and washers between the tank and the bowl. Now take the tank and gently place it onto the bowl. Make sure the holes are aligned. Slip a bolt with a washer into each of the aligned holes. How to replace all the parts in a leaky toilet. This includes disassembly and installation of a new fill assembly and flush valve. You can do this in your b Using a hacksaw, carefully cut the brass toilet bolts to a height about ½” above the tops of the nuts. Snap on the decorative plastic caps, and apply a bead of bath caulk around the toilet base and floor to provide for a sanitary seal. Use a hacksaw to cut the bolts about 1/2” above the nuts. You can use JB Weld epoxy brand products to seal cracks or leaks in your toilet tank. This product will work on fiberglass, ceramics, plastics, and concrete, just to name a few common surfaces. To seal a crack in your toilet tank, make sure the cracked area is clean and dry. Apply the JB Weld epoxy and allow it to dry. If this video helps you can buy @fixed1t a coffee LyMIMFy.

fixing a leaky toilet tank